Tranzil Engineers
Tranzil Engineers
Borivali, Mumbai, Maharashtra
GST No. 27ABIPR5336F1ZH
TrustSEAL Verified
View Mobile No.
SEND EMAIL

Dyno Drive

"Eddy Current Drive" consists of a totally enclosed, fan cooled (TEFC), flange type three-phase squirrel cage induction motor is mounted on to an eddy current clutch, having a projected, self-ventilated common frame design. There is no physical contact between motor and clutch. This results in smooth response, there by eliminating shock loading and extending equipment life.

Eddy current variable speed drive operates on AC power supply and provides constant torque at variable speeds over a wide range. Eddy current variable speed drives are economical and widely used for various Industrial applications.

The primary elements of eddy current variable speed drive are an AC motor, an eddy current clutch, a tacho generator and a seperate small solid-state electronic controller. The eddy current clutch consists of two rotating members : a drum driven at constant speed by the AC motor and within the drum, a rotor / output shaft which connected to the load. Torque is transmitted from the drum to the rotor / shaft through an adjustable magnetic field that attracts the two members. The magnetic field is produced by a clutch coil typically below 2% of the total drive power requirements, which means smaller and longer - life controller circuits can be used.

All eddy current variable speed drives have an integral tacho generator mounted around the output shaft, to give voltage and frequency proportional to speed, which is used for speed reference feed back signal to the controller and maintains the output speed within 2% for the load changes from 90% to 10%. It can also be used for speed indication.

DYNO DRIVE SPARES

DYNO DRIVE SPARES
  • DYNO DRIVE SPARES
Get Best Quote
Approx. Price: Rs 25,000 / UnitGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Country of OriginMade in India
BrandDYNO DRIVE
Output Power0.37 - 75 kW
Input Voltage3 Phase 415 Volts
Input Phase3 - Phase
Model Name/NumberID5004OV
Output Current0 TO 120 AMPS (AC MOTOR)
Input Frequency50 Hz
Start Up Torque250%
Control ProcedureAdjustable Speed Regulator
Ambient Temp.85 *C
Installation TypeFoot mounted
CapacityFull
Acceleration Time0 to 30 Sec adjustable
Warranty1 year
Degree of ProtectionClass F
Starting Torque250%
Safety TechnologyClass B insulation
EMCNA
ApplicationSugar Mill, Paper Mill, Boilers, Coal Feeders, Winders, Tension Control
Heightas per HP rating
Widthas per HP rating
Depthas per HP rating
Overload Capacity150%
Enclosure Ratingstd
Input Tolerance1%
Speed Regulation1% of full speed
Restart0 to 30 sec
Communication PortsNA
Torque0.25 Kg-m to 50 Kg-m, depends on HP rating of AC Motor

Dyno Drive Spares

"Dyno Drive" consists of a totally enclosed, fan cooled (TEFC), flange type three-phase squirrel cage induction motor is mounted on to an eddy current clutch, having a projected, self-ventilated common frame design. There is no physical contact between motor and clutch. This results in smooth response, there by eliminating shock loading and extending equipment life.

 

Dyno Drive - Eddy current variable speed drive operates on AC power supply and provides constant torque at variable speeds over a wide range. Eddy current variable speed drives are economical and widely used for various Industrial applications.

 

The primary elements of eddy current variable speed drive are an AC motor, an eddy current clutch, a tacho generator and a seperate small solid-state electronic controller. The eddy current clutch consists of two rotating members : a drum driven at constant speed by the AC motor and within the drum, a rotor / output shaft which connected to the load. Torque is transmitted from the drum to the rotor / shaft through an adjustable magnetic field that attracts the two members. The magnetic field is produced by a clutch coil typically below 2% of the total drive power requirements, which means smaller and longer - life controller circuits can be used.

 

All eddy current variable speed drives have an integral tacho generator mounted around the output shaft, to give voltage and frequency proportional to speed, which is used for speed reference feed back signal to the controller and maintains the output speed within 2% for the load changes from 90% to 10%. It can also be used for speed indication.



Request
Callback


Additional Information:

  • Item Code: ID5004OV
  • Production Capacity: 50 per month
  • Delivery Time: 3 WEEKS
  • Packaging Details: WOODEN BOX
Yes! I am interested
X

Explore More Product



Reach Us
Kalpesh Raval (Director)
Tranzil Engineers
B-110, Sai Amrat, Jaywant Sawant Road, Dahisar West
Borivali, Mumbai - 400068, Maharashtra, India


Call Us
View Mobile No.


Send E-mailSend SMS